Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Westminster Homeowners Choose KraftMaid Construction
We provide independent KraftMaid construction service in Westminster: cabinet installation, refacing, full kitchen remodeling, and smaller partial kitchen work on KraftMaid cabinets of every kind. What sets our KraftMaid work apart is that we know the difference between the cabinet lines themselves, and we plan around what each one actually needs. Denali Contractors is an independent service connecting homeowners to local pros who install and service KraftMaid cabinets. We are not a KraftMaid dealer and we’re not authorized by the manufacturer. Our technicians have up to 9 years of experience, and they work with quality parts that fit KraftMaid equipment. Call (833) 749-1562. We answer 24/7, with fast dispatch from 7am to 7pm.
Westminster has a particular kind of kitchen stock. Much of the city’s housing is 1950s to 1970s ranch tract homes, and plenty of those have been modified over the years, sometimes without permits. When a kitchen was opened up or an addition absorbed the old breakfast nook, the cabinet run usually shifted with it, and that history matters when we’re lining up a new set or squaring up an old one.
Why Trust Denali Contractors for Your KraftMaid Construction?
KraftMaid builds cabinet boxes and door styles that vary widely across product lines. That variation is exactly what drives repair-versus-replacement decisions. A Vantage box and a Momentum box are built differently, and the hardware and finishes behave differently too. Our technicians have worked with these lines enough to read a cabinet before they touch it.
We use OEM KraftMaid hinges, glides, and touch-up and finish kits wherever the cabinet box is sound. That keeps door alignment consistent and avoids the color mismatch that comes from dropping in whatever generic hinge is on hand. When a box is swollen or a face-frame has separated, we’ll say so plainly rather than sell a patch that won’t hold.
We also work warranty-safe. That means we don’t drill or modify a KraftMaid box in ways that compromise it, and we don’t talk you into replacing a sound cabinet that only needs new hardware. If we think a manufacturer warranty question should go to KraftMaid directly, we’ll tell you. We’re independent, and that independence is why our advice is straight.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Westminster
Every cabinet line develops its own habits. Here’s what we see most often in Westminster kitchens.
- Warping and delamination on painted and glazed doors. Kitchens in this climate get sustained humidity from the dishwasher and sink area, and painted or glazed finishes can lift or cup when that moisture sits against the front. It shows first near the dishwasher and along the bottom edge of lower doors.
- Soft-close hinge and drawer glide wear. This is the most common call we get. Undermount glide brackets work loose from particleboard or MDF side panels, especially on Vantage and Momentum boxes, and once a bracket pulls, the drawer sags and drags.
- Face-frame and box separation at the seams. Cabinets installed without adequate shimming develop uneven gaps over time. Doors start rubbing, and what looks like a hinge problem is often a box that isn’t square against an uneven wall.
- Finish chipping and edge wear on high-touch points. Painted Chatham and Wakefield doors take hits around the pulls and corners. It’s cosmetic until the paint film opens and moisture gets under it.
- Glaze yellowing on Portrait finishes in sun-exposed kitchens. A kitchen that catches strong afternoon light can shift the glaze tone over the years, and it shows as a duller cast on the doors nearest the window.
KraftMaid Parts & Our Repair-vs-Replace Approach
A lot of the KraftMaid work we do in Westminster comes down to one question: is the box sound? If it is, the honest answer is usually hardware and finish. OEM hinges, glides, and touch-up kits restore function and keep door alignment and color consistent. They fit the cabinet as it was built.
If the boxes are swollen, or the face-frames have separated at the seams, we’ll recommend replacement over patching. A compromised box rarely holds up under daily use in a working kitchen, and a repair that fails in six months doesn’t do anyone any favors. We don’t stock OEM KraftMaid parts, and we’re not a dealer. What we do is source quality parts that fit KraftMaid cabinets and install them correctly.
If your soft-close doors have stopped latching, call (833) 749-1562 and we’ll take a look. Estimates are free.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We open the doors, check the hinges, pull the drawers, and test the glides. Then we check whether the box and face-frame are square and whether the cabinet was shimmed properly against the wall. We note the finish type, since painted, glazed, and shaker fronts handle repair differently.
- 2
Repair or install. For hardware, we replace hinges and glides with OEM-matched parts and re-shim the boxes to square the face-frame. For installation, we set and level the new cabinets, address any wall or floor irregularity an older Westminster home presents, and align the run.
- 3
Test. Every door and drawer gets cycled. We check soft-close action, drawer tracking, and gap consistency across the run before we call it done.
- 4
Warranty. We stand behind our workmanship, and we keep the manufacturer warranty intact by not modifying a sound KraftMaid box. If a warranty question comes up, we help you route it to KraftMaid directly.
KraftMaid Products We Service & Install in Westminster
We service and install KraftMaid cabinets across the lines homeowners actually have. The Vantage series, an entry-level all-plywood box, turns up a lot in builder-grade kitchens. The Momentum series brings full-overlay door and drawer fronts and a frameless look. The Portrait series shows up in resale remodels with raised-panel and glazed finishes. Chatham and Wakefield door styles, the shaker and beadboard fronts, are everywhere in this market.
Alongside cabinet work, we handle full kitchen remodeling, small and partial kitchen remodels, and cabinet installation and refacing, plus the countertop and finish work that goes with them. Countertops are a natural companion to a cabinet job, and we work with Cambria, Silestone, Kohler, and Toto when the project calls for stone or fixtures.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
KraftMaid is one brand, not the whole job. We work with Cambria and Silestone for counters, and Kohler and Toto for sinks and fixtures, so a kitchen project stays under one relationship rather than three. If your kitchen has a mix of brands, that’s normal, and we plan around it. One contractor, one accountable scope.
KraftMaid Installation & Remodel Pricing in Westminster
Typical estimated ranges for the KraftMaid work we do in Westminster:
| Service | Typical Estimated Cost |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small & Partial Kitchen Remodels | $9,000 – $20,000 |
These are estimates. The written estimate sets the final price, and the estimate is free.
FAQs – KraftMaid Construction Service in Westminster
No. We are an independent service connecting homeowners to local pros who install and service KraftMaid cabinets. We’re not a dealer, and we’re not authorized by the manufacturer. That independence means our repair-versus-replace advice doesn’t have a sales incentive behind it. Call (833) 749-1562 for a free estimate.
Yes. We use OEM KraftMaid hinges, glides, and touch-up and finish kits wherever the cabinet box is sound, which preserves door alignment and avoids color mismatch. We don’t stock OEM parts or claim to be a dealer; we source quality parts that fit the cabinet and install them correctly.
Hardware and hinge work is usually a single visit. Cabinet installation and refacing run longer, and a full kitchen remodel is measured in weeks. The written estimate lays out the schedule for your job. Call (833) 749-1562 to talk it through.
KraftMaid cabinets across the lines homeowners actually have, including installation, refacing, hinge and glide repair, and finish touch-up. We also handle the countertops and fixtures that go with a kitchen project. Estimates are free.
Not if it’s done correctly. We keep the manufacturer warranty intact by not modifying a sound KraftMaid box, and if a warranty question comes up we help you route it to KraftMaid directly. Our workmanship is our own to stand behind.
It’s usually a hardware problem, not a cabinet problem. In most cases worn OEM hinges or glide brackets have pulled loose from the particleboard or MDF side panels on Vantage or Momentum boxes. A qualified installer typically replaces the hinges and glides with OEM-matched parts, re-shims the boxes to square the face-frame, and realigns the doors and drawers. When the box or face-frame is swollen or separated, the same visit turns into a replacement conversation instead of a hardware swap. Call (833) 749-1562 for an exact quote, estimates are free.
Often yes, if the paint film hasn’t opened up and the door itself is flat. Painted Chatham and Wakefield fronts and glazed Portrait finishes can usually be refinished when the wear is cosmetic chipping around the pulls and corners. If the door has warped or delaminated from moisture near the sink or dishwasher, a refinish won’t fix the shape underneath. Call (833) 749-1562 and we’ll tell you which case you’re in.
They need careful shimming, and older Westminster homes are the reason. Much of the city’s housing is 1950s to 1970s ranch tract homes, and many have had kitchens modified or additions absorbed over the years, so walls and floors are rarely as square as new construction. Cabinets set without adequate shimming develop uneven gaps and rubbing doors. We check the wall and floor before setting a box. Call (833) 749-1562 to schedule a free estimate.
Yes, when the boxes and face-frames are sound. Refacing or replacing just the doors and drawer fronts keeps a good cabinet box and saves the cost of a full tear-out. It’s not worth it when the boxes are swollen or the face-frames have separated at the seams, because new fronts on a compromised box won’t stay aligned. Call (833) 749-1562 for a free estimate and we’ll tell you which side of that line your kitchen is on.
Cabinet installation typically runs $4,000 – $13,000, a full kitchen remodel typically runs $14,000 – $45,000, and a small or partial kitchen remodel typically runs $9,000 – $20,000. These are typical estimated ranges for the Westminster market, and the written estimate sets the final price. Call (833) 749-1562 for an exact quote, estimates are free.
Book Your KraftMaid Service in Westminster, CA
Whether your soft-close doors have stopped latching or you’re planning a full KraftMaid kitchen in Westminster, we’ll take a look and give you a straight answer. Denali Contractors is independent and not authorized by KraftMaid, which means our advice is about your cabinets, not a sales target. Call (833) 749-1562. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the written estimate sets the price.
Written by the team at Denali Contractors.